首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1723篇
  免费   460篇
  国内免费   1186篇
测绘学   29篇
大气科学   33篇
地球物理   402篇
地质学   2327篇
海洋学   406篇
天文学   11篇
综合类   53篇
自然地理   108篇
  2024年   4篇
  2023年   22篇
  2022年   70篇
  2021年   73篇
  2020年   113篇
  2019年   128篇
  2018年   137篇
  2017年   90篇
  2016年   166篇
  2015年   123篇
  2014年   166篇
  2013年   217篇
  2012年   150篇
  2011年   193篇
  2010年   161篇
  2009年   158篇
  2008年   173篇
  2007年   167篇
  2006年   189篇
  2005年   155篇
  2004年   111篇
  2003年   97篇
  2002年   74篇
  2001年   68篇
  2000年   38篇
  1999年   42篇
  1998年   41篇
  1997年   47篇
  1996年   46篇
  1995年   31篇
  1994年   23篇
  1993年   21篇
  1992年   9篇
  1991年   16篇
  1990年   12篇
  1989年   5篇
  1988年   6篇
  1987年   7篇
  1986年   5篇
  1985年   3篇
  1984年   5篇
  1982年   2篇
  1978年   1篇
  1977年   1篇
  1974年   1篇
  1972年   1篇
  1954年   1篇
排序方式: 共有3369条查询结果,搜索用时 343 毫秒
11.
张渭军 《探矿工程》2020,47(6):86-91
在寒区工程建设中,冻融循环会引起土强度和变形特性发生改变。为了研究多次冻融循环后土的强度和变形参数的变化量,本文以冻融和非冻融的粉质粘土饱和试样为研究对象,通过固结排水三轴剪切试验、三轴等向压缩试验和弹性模量试验,比较了冻融循环对土样强度参数和变形参数的影响。试验结果显示:冻融和非冻融试样的应力—应变关系曲线均呈应变硬化型,对于原状试样冻融作用破坏了其结构性;冻融作用导致土体强度的降低,主要体现在粘聚力的降低,约降低了55.6%;冻融循环对变形参数有明显的影响,其中最明显的是弹性模量的降低,降低了31.2%。该研究结论可为工程冻害处理提供参考,也可为相关研究的数值计算提供试验参数。  相似文献   
12.
稻壳灰与土体混合应用,一方面废弃资源再利用,环保,又可增强土体强度。通过三轴试验,研究不同比例稻壳灰混合黏土及其加筋土应力?应变性能、强度特性以及不同应变水平下模量、偏应力及加筋强度比等土体变化特征。试验结果表明,随稻壳灰比例增加,混合土最大干密度显著减小,最优含水率显著增加。添加不同比例稻壳灰对加筋土抗剪强度有较大影响,10%~15%稻壳灰比例下,加筋稻壳灰混合土初始切线模量和应力峰值达到最大,抗剪强度较优。与土工织物加筋稻壳灰混合土相比,土工格栅加筋稻壳灰混合土偏应力及抗剪强度更大,土工格栅层数对土体抗剪强度增大效果更明显,对应的应力?应变曲线拐点也更突出。试样弹性模量与稻壳灰比例及筋材种类、层数有关,加入稻壳灰后,土体弹性模量增长显著,土工格栅加筋稻壳灰混合土较优比例下可增加1.5倍多,稻壳灰及筋材均能有效提高土体强度。随加筋层数增加,稻壳灰混合土加筋强度比明显增大,与围压关系较小。  相似文献   
13.
Fine-grained marine sediments containing large undissolved gas bubbles are widely distributed around the world. Presence of the bubbles could degrade the undrained shear strength (su ) of the soil, when the gas pressure ug is relatively high as compared with the effective stress in the saturated soil matrix. Meanwhile, the addition of bubbles may also increase su when the difference between ug and pore water pressure uw becomes smaller than the water entry value, causing partial water drainage from the saturated matrix into the bubbles (bubble flooding) during globally undrained shearing. A new constitutive model for describing the two competing effects on the stress-strain relationship of fine-grained gassy soil is proposed within the framework of critical state soil mechanics. The gassy soil is considered as a three-phase composite material with compressible cavities, which allows water entry from the saturated matrix. Bubble flooding is modelled by introducing an additional positive volumetric strain increment of the saturated clay matrix, which is dependent on the difference between pore gas and pore water pressure based on experimental observations. A modified hardening law based on that of the modified Cam clay model is employed, which in conjunction with the expression for bubble flooding, can describe both the detrimental and beneficial effects of gas bubbles on soil strength and plastic hardening in shear. Only two extra parameters in addition to those in the modified Cam clay model are used. It is shown that the key features of the stress-strain relationship of three fine-grained gassy soils can be reproduced satisfactorily.  相似文献   
14.
深海钻探通常采用无隔水管开路钻进,当更换钻头或钻具,测井、处理孔内事故等情况时,需要起下钻后重新进入原钻孔,此过程称为重入钻孔。由于钻探船与海底孔口有数千米的水体相隔,受海浪和洋流作用,钻探船动荡不稳,钻杆柱摇摆不定,要想重新进入原钻孔并非易事。本文通过广泛调研,对海底基盘、声呐重入系统、水下电视重入系统及无人遥控潜水器(ROV)等目前几种常见的重入钻孔技术进行了详细介绍,对各种技术的优缺点进行了综合对比,优选了水下电视重入系统作为我国深海钻探重入钻孔技术方案,初步提出了技术设计思路,为样机研发和工艺制定奠定了基础。  相似文献   
15.
Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   
16.
Abstract

This study developed prestressed high-strength concrete (PHC) piles reinforced with high-strength materials (glass fiber-reinforced polymer (GFRP) bars) for flexural performance enhancement. Flexural strengths and behaviors of PHC piles reinforced with hybrid GFRP and steel bars were experimentally investigated, respectively. Large-scale specimens with total lengths of 12,000?mm and diameters of 600?mm were constructed and tested under bending, accompanied by evaluation of effects of non-prestressed reinforcement type and longitudinal reinforcement ratio. J-factors were calculated to evaluate deformability of all the specimens. PHC piles reinforced with GFRP bars were demonstrated to have much higher flexural capacity than those reinforced with steel bars. Moreover, strains at the midspans of cross sections of all the specimens basically conformed to the assumption of plane section. Failure of PHC piles reinforced with GFRP bars was attributable to gradual concrete crushing, while that of PHC piles reinforced with steel bars resulted from steel yielding. Results of this study were expected to provide theoretical basis for wide engineering applications of PHC piles reinforced with hybrid GFRP bars and steel bars in marine structures.  相似文献   
17.
Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   
18.
为了更真实地进行钢筋混凝土结构抗震性能评估,应该考虑材料的应变率效应影响。600 MPa级高强钢筋作为新一代建筑钢材,尚无考虑应变率效应影响的600 MPa级高强钢筋混凝土框架结构抗震性能研究。首先进行了不同应变率下600 MPa级高强钢筋拉伸力学性能试验,利用试验数据拟合得到600 MPa级高强钢筋在不同应变率下的强度提高系数表达式,并利用OpenSees软件进行了配置600 MPa级高强钢筋混凝土框架结构抗震性能模拟分析,研究了应变率效应对框架结构抗震性能的影响。研究结果表明:随着应变率的增大,钢筋的屈服强度和极限强度均得到提高,屈服强度最大提高11.5%,极限强度最大提高8.9%;随着所考虑的材料应变率增加,配置600 MPa级高强钢筋框架结构最大顶点位移总体上呈减小趋势,地震波强度越强,应变率效应影响越大,而层间位移角减小幅值相差不大。研究成果可作为600MPa级高强钢筋混凝土框架结构抗震评估的依据。  相似文献   
19.
为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比(“工”字型)和壁板宽厚比(“箱”型)增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。  相似文献   
20.
The strength and architecture of roots and other below-ground organs of riparian and aquatic plants affect plant resistance to uprooting and contribute to reinforcing river bank, bar and bed materials. Therefore, root properties are an important element in models for estimating river bank stability and such models may focus on the role of plants by using root strength–diameter relationships for the particular plant species that are present. Here we explore the degree to which there appear to be significant differences in strength–diameter relationships between and within species-specific data sets obtained for two riparian tree/shrub (Populus nigra, Salix alba) and two emergent aquatic macrophyte (Sparganium erectum, Phalaris arundinacea) species in different European river environments. While the analysed data sets were not specifically collected to answer these research questions, the results are sufficiently compelling to make the case for the collection of a more comprehensive data set and its rigorous analysis. This would allow recommendations to be made on the degree to which (i) species-specific or more general relationships between root/rhizome strength and diameter are appropriate, (ii) such relationships are applicable within and between rivers in different geographical regions and subject to different local environmental conditions, and (iii) further (minimalist) field observations are needed to calibrate such relationships for investigations of new locales or species. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号